Jump to content

Screen Size Lib

Naughty Alien

1,187 views

Hello guys. This time, here is small utility, nothing spectacular, just smal library what will let you manage available screen size your GPU support, easy. You can also use it in main menu where you will setup all available resolutions and browse trough list, or automatically detect maximum resolution upon start and set screen, etc. So here are commands.

 

So, first we need to initialize library.

 

Global SCREEN_SIZE:TScreenSize

SCREEN_SIZE = TScreenSize.Create(bitDepth:Int=32)

 

bitDepth is your screen depth and by default is 32, and it means, supported resolutions will be for 32 bit depth.

 

Now library is initialized. All available resolutions GPU support are accessible trough screen size modes. Screen size modes are nothing but indexes of array, where screen size is stored, for width and height. So, in order to know how many available resolutions we have, we will use this command:

 

Global NUMBER_OF_AVAILABLE_RESOLUTIONS:Int

NUMBER_OF_AVAILABLE_RESOLUTIONS = SCREEN_SIZE.get_number_of_modes_available()

 

So, if you want to go trough list of all available resolutions,

you will go from 0 to NUMBER_OF_AVAILABLE_RESOLUTIONS.

 

If you want to set up screen size, you can do it like this:

SCREEN_SIZE.size(width:Int=True, height:Int=False,mode_:Int=0,higherRes:Int=False)

 

If width is true, returned size will be width. If height is true, height size will be returned.

If mode is provided in range 0 to NUMBER_OF_AVAILABLE_RESOLUTIONS, It will be provided size for that mode, for width or height, depending which one is flagged true.

If higherRes is true, it will be returned largest screen size for width or height, depending which one is flagged true.

 

So, for example, if you want to setup your screen upon loading on to maximum resolution, since you dont know in advance what kind of GPU/Monitor will be used, and you want to set it higher so user can later change it, you will do simply this(example with framework):

 

Global SCREEN_SIZE:TScreenSize

SCREEN_SIZE = TScreenSize.Create(bitDepth:Int=32)

Graphics(SCREEN_SIZE.size(,,, True), SCREEN_SIZE.size(False, True,, True), 32)

 

LogStreamEnabled = False'AppLogMode equivalent

Global FW:TFramewerk

FW = TFramewerk.Create()

If Not FW RuntimeError "Failed to initialize engine."

 

..and rest is history smile.png . By combining on many ways, you can have many use of it, from menu systems where screens will be detected, up to automatic initializations, etc.. Also, you dont have to sort out screen sizes. They are already sorted (0 means lovest resolution, SCREEN_SIZE.get_number_of_modes_available(), is the highest), so its easy.

 

Anyway, you can see how to use lib in provided example, so it should be self explanatory. In case it doesnt work, let me know.

 

INSTALLATION:

As usual, copy e1.mod to mod folder, and include it as it was done in provided example, and you are good to go..cheerrsss...

 

DOWNLOAD HERE:

http://www.leadwerks.com/werkspace/files/file/351-screen-size-utility/



2 Comments


Recommended Comments

Pity I don't use BMax. Nice of you to post it non the less NA. Will get round to writing something myself to enumerate the video modes eventually.

Share this comment


Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Blog Entries

    • By Josh in Josh's Dev Blog 6
      For finer control over what 2D elements appear on what camera, I have implemented a system of "Sprite Layers". Here's how it works:
      A sprite layer is created in a world. Sprites are created in a layer. Layers are attached to a camera (in the same world). The reason the sprite layer is linked to the world is because the render tweening operates on a per-world basis, and it works with the sprite system just like the entity system. In fact, the rendering thread uses the same RenderNode class for both.
      I have basic GUI functionality working now. A GUI can be created directly on a window and use the OS drawing commands, or it can be created on a sprite layer and rendered with 3D graphics. The first method is how I plan to make the new editor user interface, while the second is quite flexible. The most common usage will be to create a sprite layer, attach it to the main camera, and add a GUI to appear in-game. However, you can just as easily attach a sprite layer to a camera that has a texture render target, and make the GUI appear in-game on a panel in 3D. Because of these different usages, you must manually insert events like mouse movements into the GUI in order for it to process them:
      while true do local event = GetEvent() if event.id == EVENT_NONE then break end if event.id == EVENT_MOUSE_DOWN or event.id == EVENT_MOUSE_MOVE or event.id == EVENT_MOUSE_UP or event.id == EVENT_KEY_DOWN or event.id == EVENT_KEY_UP then gui:ProcessEvent(event) end end You could also input your own events from the mouse position to create interactive surfaces, like in games like DOOM and Soma. Or you can render the GUI to a texture and interact with it by feeding in input from VR controllers.

      Because the new 2D drawing system uses persistent objects instead of drawing commands the code to display elements has changed quite a lot. Here is my current button script. I implemented a system of abstract GUI "rectangles" the script can create and modify. If the GUI is attached to a sprite layer these get translated into sprites, and if it is attached directly to a window they get translated into system drawing commands. Note that the AddTextRect doesn't even allow you to access the widget text directly because the widget text is stored in a wstring, which supports Unicode characters but is not supported by Lua.
      --Default values widget.pushed=false widget.hovered=false widget.textindent=4 widget.checkboxsize=14 widget.checkboxindent=5 widget.radius=3 widget.textcolor = Vec4(1,1,1,1) widget.bordercolor = Vec4(0,0,0,0) widget.hoverbordercolor = Vec4(51/255,151/255,1) widget.backgroundcolor = Vec4(0.2,0.2,0.2,1) function widget:MouseEnter(x,y) self.hovered = true self:Redraw() end function widget:MouseLeave(x,y) self.hovered = false self:Redraw() end function widget:MouseDown(button,x,y) if button == MOUSE_LEFT then self.pushed=true self:Redraw() end end function widget:MouseUp(button,x,y) if button == MOUSE_LEFT then self.pushed = false if self.hovered then EmitEvent(EVENT_WIDGET_ACTION,self) end self:Redraw() end end function widget:OK() EmitEvent(EVENT_WIDGET_ACTION,self) end function widget:KeyDown(keycode) if keycode == KEY_ENTER then EmitEvent(EVENT_WIDGET_ACTION,self) self:Redraw() end end function widget:Start() --Background self:AddRect(self.position, self.size, self.backgroundcolor, false, self.radius) --Border if self.hovered == true then self:AddRect(self.position, self.size, self.hoverbordercolor, true, self.radius) else self:AddRect(self.position, self.size, self.bordercolor, true, self.radius) end --Text if self.pushed == true then self:AddTextRect(self.position + iVec2(1,1), self.size, self.textcolor, TEXT_CENTER + TEXT_MIDDLE) else self:AddTextRect(self.position, self.size, self.textcolor, TEXT_CENTER + TEXT_MIDDLE) end end function widget:Draw() --Update position and size self.primitives[1].position = self.position self.primitives[1].size = self.size self.primitives[2].position = self.position self.primitives[2].size = self.size self.primitives[3].size = self.size --Update the border color based on the current hover state if self.hovered == true then self.primitives[2].color = self.hoverbordercolor else self.primitives[2].color = self.bordercolor end --Offset the text when button is pressed if self.pushed == true then self.primitives[3].position = self.position + iVec2(1,1) else self.primitives[3].position = self.position end end This is arguably harder to use than the Leadwerks 4 system, but it gives you advanced capabilities and better performance that the previous design did not allow.
    • By reepblue in reepblue's Blog 1
      Premake is multiplication project maker.Unlike CMake, it simply generates a project file for the given IDE giving you a clean result. You only need the one light weight executable and a lua script for this to work.  I've spent today setting it up with Leadwerks. I haven't tested Linux yet, but it should work.
      My premake5.lua file:
      g_LeadwerksHeaderPath = "./Engine/Include" g_LeadwerksLibPath = "./Engine/Libs" function GlobalSettings() -- Include Directories includedirs { "%{prj.name}", "%{g_LeadwerksHeaderPath}", "%{g_LeadwerksHeaderPath}/Libraries/SDL2-2.0.10/include", "%{g_LeadwerksHeaderPath}/Libraries/NewtonDynamics/sdk/dgCore", "%{g_LeadwerksHeaderPath}/Libraries/NewtonDynamics/sdk/dgNewton", "%{g_LeadwerksHeaderPath}/Libraries/libvorbis/include", "%{g_LeadwerksHeaderPath}/Libraries/libogg/include", "%{g_LeadwerksHeaderPath}/Libraries/openssl/include", "%{g_LeadwerksHeaderPath}/Libraries/VHACD/src/VHACD_Lib/inc", "%{g_LeadwerksHeaderPath}/Libraries/glslang", "%{g_LeadwerksHeaderPath}/Libraries/freetype-2.4.7/include", "%{g_LeadwerksHeaderPath}/Libraries/OpenAL/include", "%{g_LeadwerksHeaderPath}/Libraries/NewtonDynamics/sdk/dMath", "%{g_LeadwerksHeaderPath}/Libraries/NewtonDynamics/sdk/dgTimeTracker", "%{g_LeadwerksHeaderPath}/Libraries/NewtonDynamics/sdk/dContainers", "%{g_LeadwerksHeaderPath}/Libraries/NewtonDynamics/sdk/dCustomJoints", "%{g_LeadwerksHeaderPath}/Libraries/RecastNavigation/RecastDemo/Include", "%{g_LeadwerksHeaderPath}/Libraries/RecastNavigation/DetourCrowd/Include", "%{g_LeadwerksHeaderPath}/Libraries/RecastNavigation/DetourTileCache/Include", "%{g_LeadwerksHeaderPath}/Libraries/RecastNavigation/DebugUtils/Include", "%{g_LeadwerksHeaderPath}/Libraries/RecastNavigation/Recast/Include", "%{g_LeadwerksHeaderPath}/Libraries/RecastNavigation/Detour/Include", "%{g_LeadwerksHeaderPath}/Libraries/tolua++-1.0.93/include", "%{g_LeadwerksHeaderPath}/Libraries/lua-5.1.4", "%{g_LeadwerksHeaderPath}/Libraries/glew-1.6.0/include/GL", "%{g_LeadwerksHeaderPath}/Libraries/glew-1.6.0/include", "%{g_LeadwerksHeaderPath}/Libraries/enet-1.3.1/include", "%{g_LeadwerksHeaderPath}/Libraries/zlib-1.2.5", "%{g_LeadwerksHeaderPath}/Libraries/freetype-2.4.3/include" } -- Global Defines: defines { "__STEAM__", "_CUSTOM_JOINTS_STATIC_LIB", "FT2_BUILD_LIBRARY", "LEADWERKS_3_1", "DG_DISABLE_ASSERT", "OPENGL", "_NEWTON_STATIC_LIB", "_STATICLIB" } -- Windows Exclusive: filter "system:windows" systemversion "latest" pchsource "%{prj.name}/stdafx.cpp" links { "libcryptoMT.lib", "libsslMT.lib", "Rpcrt4.lib", "crypt32.lib", "libcurl.lib", "msimg32.lib", "lua51.lib", "steam_api.lib", "ws2_32.lib", "Glu32.lib", "libovrd.lib", "OpenGL32.lib", "winmm.lib", "Psapi.lib", "OpenAL32.lib", "SDL2.lib", "Leadwerks.lib" } libdirs { "%{g_LeadwerksLibPath}/Windows/x86", "%{g_LeadwerksLibPath}/Windows/x86/%{cfg.buildcfg}" } defines { "PSAPI_VERSION=1", "PTW32_STATIC_LIB", "PTW32_BUILD", "_NEWTON_USE_LIB", "_LIB", "DG_USE_NORMAL_PRIORITY_THREAD", "GLEW_STATIC", "WINDOWS", "WIN32", "OS_WINDOWS", "PLATFORM_WINDOWS", "_WIN_32_VER" } buildoptions { "/D \"SLB_LIBRARY\"", } flags { "NoMinimalRebuild" } linkoptions { "/NODEFAULTLIB:MSVCRT.lib", "/NODEFAULTLIB:MSVCRTD.lib" } -- Linux Exclusive: filter "system:linux" systemversion "latest" linkoptions { "-ldl", "-lopenal", "-lGL", "-lGLU", "-lX11", "-lXext", "-lXrender", "-lXft", "-lpthread", "-lcurl", --"-lSDL2", "%{g_LeadwerksLibPath}/Linux/libluajit.a", "%{gameDir}/libopenvr_api.so" } defines { "ZLIB", "PLATFORM_LINUX", "unix", "_POSIX_VER", "_POSIX_VER_64", "DG_THREAD_EMULATION", "DG_USE_THREAD_EMULATION", "GL_GLEXT_PROTOTYPES", "LUA_USE_LINUX", "_GLIBCXX_USE_CXX11_ABI", "_CUSTOM_JOINTS_STATIC_LIB" } linkoptions { "%{g_LeadwerksLibPath}/Linux/%{cfg.buildcfg}/Leadwerks.a" } -- Debug Build: filter "configurations:Debug" runtime "Debug" symbols "on" targetsuffix ".debug" defines { "DEBUG", "_DEBUG" } if os.target() == "windows" then links { "newton_d.lib", "dContainers_d.lib", "dCustomJoints_d.lib" } end -- Release Build: filter "configurations:Release" runtime "Release" optimize "on" if os.target() == "windows" then buildoptions { "/MP" } links { "newton.lib", "dContainers.lib", "dCustomJoints.lib" } end end function GenerateLuaApp() workspace "PremakeTest" architecture "x86" --architecture "x86_64" startproject "LuaApp" configurations { "Debug", "Release" } -- Test application project "LuaApp" kind "ConsoleApp" language "C++" location "%{prj.name}" staticruntime "on" -- Project Directory: projectDir = "%{prj.name}/" -- Game Directory: gameDir = _WORKING_DIR .. "/../Projects/%{prj.name}" -- OBJ Directory objdir (projectDir .. "%{cfg.buildcfg}_%{prj.name}") targetdir (gameDir) files { "%{prj.name}/**.h", "%{prj.name}/**.cpp" } pchheader "stdafx.h" -- Custom Defines defines { "__TEST_ME_", } GlobalSettings() end newaction { trigger = "luaapp", description = "Builds the stock lua app", execute = GenerateLuaApp() } if _ACTION == "luaapp" then GenerateLuaApp() end Then I just have batch file that builds the project file.
      "devtools/premake5.exe" vs2017 luaapp pause My impressions are more positive on this than CMake as CMake creates a lot of extra files to do real time updating if the CMakeList file is updated. Premake simply just builds the project file and that's it. It really reminds me of VPC stuff I had to deal with in my modding days. Really interested to how codelite projects generate on Linux.
    • By Josh in Josh's Dev Blog 4
      I have been working on 2D rendering off and on since October. Why am I putting so much effort into something that was fairly simple in Leadwerks 4? I have been designing a system in anticipation of some features I want to see in the GUI, namely VR support and in-game 3D user interfaces. These are both accomplished with 2D drawing performed on a texture. Our system of sprite layers, cameras, and sprites was necessary in order to provide enough control to accomplish this.
      I now have 2D drawing to a texture working, this time as an official supported feature. In Leadwerks 4, some draw-to-texture features were supported, but it was through undocumented commands due to the complex design of shared resources between OpenGL contexts. Vulkan does not have this problem because everything, including contexts (or rather, the VK equivalent) is bound to an abstract VkInstance object.

      Here is the Lua code that makes this program:
      --Get the primary display local displaylist = ListDisplays() local display = displaylist[1]; if display == nil then DebugError("Primary display not found.") end local displayscale = display:GetScale() --Create a window local window = CreateWindow(display, "2D Drawing to Texture", 0, 0, math.min(1280 * displayscale.x, display.size.x), math.min(720 * displayscale.y, display.size.y), WINDOW_TITLEBAR) --Create a rendering framebuffer local framebuffer = CreateFramebuffer(window); --Create a world local world = CreateWorld() --Create second camera local texcam = CreateCamera(world) --Create a camera local camera = CreateCamera(world) camera:Turn(45,-45,0) camera:Move(0,0,-2) camera:SetClearColor(0,0,1,1) --Create a texture buffer local texbuffer = CreateTextureBuffer(512,512,1,true) texcam:SetRenderTarget(texbuffer) --Create scene local box = CreateBox(world) --Create render-to-texture material local material = CreateMaterial() local tex = texbuffer:GetColorBuffer() material:SetTexture(tex, TEXTURE_BASE) box:SetMaterial(material) --Create a light local light = CreateLight(world,LIGHT_DIRECTIONAL) light:SetRotation(55,-55,0) light:SetColor(2,2,2,1) --Create a sprite layer. This can be shared across different cameras for control over which cameras display the 2D elements local layer = CreateSpriteLayer(world) texcam:AddSpriteLayer(layer) texcam:SetPosition(0,1000,0)--put the camera really far away --Load a sprite to display local sprite = LoadSprite(layer, "Materials/Sprites/23.svg", 0, 0.5) sprite:MidHandle(true,true) sprite:SetPosition(texbuffer.size.x * 0.5, texbuffer.size.y * 0.5) --Load font local font = LoadFont("Fonts/arial.ttf", 0) --Text shadow local textshadow = CreateText(layer, font, "Hello!", 36 * displayscale.y, TEXT_LEFT, 1) textshadow:SetColor(0,0,0,1) textshadow:SetPosition(50,30) textshadow:SetRotation(90) --Create text text = textshadow:Instantiate(layer) text:SetColor(1,1,1,1) text:SetPosition(52,32) text:SetRotation(90) --Main loop while window:Closed() == false do sprite:SetRotation(CurrentTime() / 30) world:Update() world:Render(framebuffer) end I have also added a GetTexCoords() command to the PickInfo structure. This will calculate the tangent and bitangent for the picked triangle and then calculate the UV coordinate at the picked position. It is necessary to calculate the non-normalized tangent and bitangent to get the texture coordinate, because the values that are stored in the vertex array are normalized and do not include the length of the vectors.
      local pick = camera:Pick(framebuffer, mousepos.x, mousepos.y, 0, true, 0) if pick ~= nil then local texcoords = pick:GetTexCoords() Print(texcoords) end Maybe I will make this into a Mesh method like GetPolygonTexCoord(), which would work just as well but could potentially be useful for other things. I have not decided yet.
      Now that we have 2D drawing to a texture, and the ability to calculate texture coordinates at a position on a mesh, the next step will be to set up a GUI displayed on a 3D surface, and to send input events to the GUI based on the user interactions in 3D space. The texture could be applied to a computer panel, like many of the interfaces in the newer DOOM games, or it could be used as a panel floating in the air that can be interacted with VR controllers.
×
×
  • Create New...