Jump to content

And, Hello

Paul Thomas

1,396 views

There are several here who already know me, but for those who don't, my name is Paul Thomas. I've been programming for a long time now; I started when I was 16 (I'm now 30) with HTML, CSS, Javascript, and CGI/Perl. Hell back then there wasn't a lot of people who even used the internet at home, lol. At least in my area, I'm sure others, especially in California, were a lot further ahead at that time in terms of technology and the interest in the technology.

 

Through the years I've learned multiple languages from strictly web-based to software based. My interest in computers when I was 16 was to make a game, but at the time I thought it would have been much easier to prototype the whole idea in a web-based browser game. I had completed the browser game, which was the original "Eternal Crisis," and worked nicely. My plan was to update the entire web-based system, polish everything, and officially advertise (I had invited friends to play the game). That's when I learned about a "fried hard drive" and eventually learned about "backup" and how to install a hard drive.

 

Those whom already know me, know what Eternal Crisis is, and my Blogger shows some of the history on that project. I had taken that project, along with another, over to Unreal Engine 3 because it best suit the project. Along the years of learning that engine I was using LE for prototyping ideas and so forth.

 

While I'm not working on my own engine (temporarily titled "3D Dice"), FPS/RPG framework for UE3, or R.A.T.S., I work on my framework for Leadwerks Engine 2.5. I've never shared this framework before, in fact it always felt like I had to pull it out of a shallow grave each time I added to the framework design and programming. I'm a notebook junkie, I plan out mechanics, structures, and so forth on paper, before going over to digital. Old habbits that die hard I guess.

 

Now I felt like sharing the progress, which isn't a lot, but it's a great start to me. It's a great start to me because it actually runs, lol. The state of the framework isn't even close to the final planned and written design, but progress is progress. Always move forward until it's finished, even if you can only pick that project up once every two weeks (by then I/you should probably take a look at your workload and fix it instead of attempting such project schedules; however this isn't vital to me and rates low on my importance scale), if it's updated then progress is moving forward. This is also harder to work with if you don't plan your software before actually programming (unless it's routine for you with available libraries for shortcuts in development).

 

As most programmers should know, the programmers "update" isn't as glamorous as an artists "update" as it's not about visual stimulation but overall program/software flow. In the case of my LE framework (obviously untitled) it's all about providing mechanics and how that is achieved is important especially in the case of LUA access and how everything works together; from configuration/data management, to input binding, and all the way down to AI.

 

Until occupied again by my other tasks I will eventually share the entire framework structure and I will always be showing examples of syntax; cause that's what programmers do. Just to clear the obvious questions that may come from the community:

 

Q) Do I plan to give away code, the framework, and be an open source kind of person?

A) No, not really. First of all, you would have to wait, to anyone else at the moment the framework is as useful is a partially finished library. How long you would have to wait would depend on how much time I can spend on the framework and in all honestly it's not much at all (read above, and actually read).

 

Q) Do I plan to sell or lease the framework?

A) No, don't think so. I even think that's against Leadwerks terms since it could be deemed an "FPS Creator," which is definitely in the terms.

 

Q) Is my framework really that great?

A) Nah, I mostly ramble, and I'm actually writing this to share with long time friends here at Leadwerks. Some won't even visit anywhere else to communicate because they are so used to using Leadwerks for that; it is indeed where we all met.

 

Q) Who are my friends?

A) I have none, it was a lie.

 

 

 

Now, about this framework. This "framework" isn't the same, exactly, as the framework that comes with LE. The framework that comes with LE handles some dirty work for you when it comes to creating the worlds, cameras for those worlds, shader effects, and helper functions. The framework I'm designing is technically similar to a game engine. I personally consider Leadwerks Engine as a rendering API with physics and this framework uses that rendering API and provides mechanics. The mechanics the framework provides is what makes up the detail of the framework.

 

INI

SQL

Application

Graphics

Game

 

The above are considered "managers" in that they only handle what they should be managing. The "INI" only works with INI files, such as a configuration manager. The "SQL" only works with SQLite3, providing helper functions for easier SQL management, and so forth. There are more planned managers than the above, but these are what are completed in terms of programming. The only real interesting portion to discuss about the framework is within the "Game" manager itself.

 

The game manager provides two special classes/managers; "Object" and "Actor." Actor inherits everything about an Object. What defines an Object is a game entity that is never interacted with by the player. Objects are useful as it can be used for multiple purposes without consuming a lot of resources for each "component" or "plugin" I'd like to add onto the framework. For example, a Timer would be an Object. You don't interact with a Timer in a game, but there is a timer running in the background.

 

Example:

class ETimer : public EObject
{
 public:
   ETimer(void);
   virtual ~ETimer(void);

   void Initialize(void);
   void SetTimer(float StartTime);
   void StopTimer();
};

 

While working with the framework you would do something similar to:

// EGame::EObject
// EGame::Objects
EObject Objects;
// ..
ETimer Timer;
Objects.Add("Timer", Timer);
// ..

ETimer Timer = Objects.Get("Timer");
Timer.StartTimer(0.0);
// ..
Timer.StopTimer();
// inherited by EObject
Timer.Unload();

 

An Actor inherits everything that defines an Object. The difference between the two is that an Actor is something that a player could see, hear, interact with, or can move, rotate, and so forth. If you can see how this is all going, everything starts extending the Actor, such as the character, weapon, or items. Here are some examples of working with Actors in the framework:

 

// EGame::Actors
Actors.Add("oilbarrel", "oilbarrel.gmf");
// ..
Actors.Rotate("oilbarrel", vec3(10.0f, 0.0f, 10.0f));
// ..
Actors.Translate("oilbarrel", vec3(10.0f, 0.0f, 0.0f));
// ..
EActor barrel = Actors.Get("oilbarrel");
// rotate with interpolation
barrel.Rotate(vec3(1.0f), 0.1f);
barrel.Translate(vec3(0.0f, 1.0f, 0.0f), 0.1f);
// ..
EActor Barrel;
// new name
Barrel.Name = "barrel01";
// new mesh
Barrel.LoadMesh("oildrum.gmf");
Actors.Edit("oilbarrel", Barrel);

 

A quick overview of an Actor:

//EActor
ID
Name
Tag
Parent
Location
Rotation
Mesh
Sounds
Particles

 

Each Actor can also have children which are also Actors. This provides another version of parent/child relationships but also provides additional benefits which will be discussed in later blogs. The ID and Name variables are provided by Object and the Object provides more variables, but is listed for importance.

 

When creating an Actor it is automatically tagged for unique identification. In the above example "oilbarrel" is actually stored as "oilbarrel_0" and simply incremented for each Actor that is created. This is identified by the Actors "Tag". The "Name" variable is a forced name, therefore searching for an Actor by the name, with more than one Actor having the same name, the first result is returned.

 

Actors will be automatically created properly for each entity in a scene. The framework will be using a custom scene manager and handles initial Actor creation. Programmers/Scripters can then add to the Actors list with C++ or LUA like the above examples.

 

class MyGame : public EGame
{
 public:
   void Load(void);
   void Update(float DeltaTime);
   // ..
   void MyGame::Load(void)
   {
  Actors.Add("custom_actor", "mymesh.gmf", "force_tag_name");

  EActor actor = Actors.Get("custom_actor");
  EActor actorCopy = Actors.GetTag("force_tag_name");

  actor.Translate(vec3(0.0f));
   }

   void MyGame::Update(float DeltaTime)
   {
  EActor actor = Actors.Get("custom_actor");
  // interp move with speed and threshold option
  actor.Move(vec3(10.0f), 1.0f, 1.0f, 0.35f);
   }
};

 

In upcoming blogs, when I do get the time, I'll post up some videos. Those selected for the invite only alpha testing will get their information on how to use the framework. Friends of mine that didn't get an invite and are interested in alpha testing please private message me; I most likely didn't send you the information because I figured you were busy with your own project(s).

 

Well, out of time. Thanks for reading.



4 Comments


Recommended Comments

Sorry ... but who are you?

lol

 

Paul's been around a long time, he just has a fancy new avatar.

Awesome, it's now fancy. The last time I made a new avatar you said it was emo. I guess this is an improvement. Granted, I stole the overall style from Assassin's Creed. I can't help it, fantastic storyline, awesome era, great art, beautiful mechanics and AI.

Share this comment


Link to comment

Blog Update:

I've been spending time organizing the classes, preparing to share with LUA, and DLL. Figured now while it's early. It may be too early to provide much to LUA or DLL. In any case, soon it's time to move on to actual actors (camera, terrain, volumes/triggers, etc.), after I finish with meshes.

Share this comment


Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Blog Entries

    • By Josh in Josh's Dev Blog 2
      I started to implement quads for tessellation, and at that point the shader system reached the point of being unmanageable. Rendering an object to a shadow map and to a color buffer are two different processes that require two different shaders. Turbo introduces an early Z-pass which can use another shader, and if variance shadow maps are not in use this can be a different shader from the shadow shader. Rendering with tessellation requires another set of shaders, with one different set for each primitive type (isolines, triangles, and quads). And then each one of these needs a masked and opaque option, if alpha discard is enabled.
      All in all, there are currently 48 different shaders a material could use based on what is currently being drawn. This is unmanageable.
      To handle this I am introducing the concept of a "shader family". This is a JSON file that lists all possible permutations of a shader. Instead of setting lots of different shaders in a material, you just set the shader family one:
      shaderFamily: "PBR.json" Or in code:
      material->SetShaderFamily(LoadShaderFamily("PBR.json")); The shader family file is a big JSON structure that contains all the different shader modules for each different rendering configuration: Here are the partial contents of my PBR.json file:
      { "turboShaderFamily" : { "OPAQUE": { "default": { "base": { "vertex": "Shaders/PBR.vert.spv", "fragment": "Shaders/PBR.frag.spv" }, "depthPass": { "vertex": "Shaders/Depthpass.vert.spv" }, "shadow": { "vertex": "Shaders/Shadow.vert.spv" } }, "isolines": { "base": { "vertex": "Shaders/PBR_Tess.vert.spv", "tessellationControl": "Shaders/Isolines.tesc.spv", "tessellationEvaluation": "Shaders/Isolines.tese.spv", "fragment": "Shaders/PBR_Tess.frag.spv" }, "shadow": { "vertex": "Shaders/DepthPass_Tess.vert.spv", "tessellationControl": "Shaders/DepthPass_Isolines.tesc.spv", "tessellationEvaluation": "Shaders/DepthPass_Isolines.tese.spv" }, "depthPass": { "vertex": "Shaders/DepthPass_Tess.vert.spv", "tessellationControl": "DepthPass_Isolines.tesc.spv", "tessellationEvaluation": "DepthPass_Isolines.tese.spv" } }, "triangles": { "base": { "vertex": "Shaders/PBR_Tess.vert.spv", "tessellationControl": "Shaders/Triangles.tesc.spv", "tessellationEvaluation": "Shaders/Triangles.tese.spv", "fragment": "Shaders/PBR_Tess.frag.spv" }, "shadow": { "vertex": "Shaders/DepthPass_Tess.vert.spv", "tessellationControl": "Shaders/DepthPass_Triangles.tesc.spv", "tessellationEvaluation": "Shaders/DepthPass_Triangles.tese.spv" }, "depthPass": { "vertex": "Shaders/DepthPass_Tess.vert.spv", "tessellationControl": "DepthPass_Triangles.tesc.spv", "tessellationEvaluation": "DepthPass_Triangles.tese.spv" } }, "quads": { "base": { "vertex": "Shaders/PBR_Tess.vert.spv", "tessellationControl": "Shaders/Quads.tesc.spv", "tessellationEvaluation": "Shaders/Quads.tese.spv", "fragment": "Shaders/PBR_Tess.frag.spv" }, "shadow": { "vertex": "Shaders/DepthPass_Tess.vert.spv", "tessellationControl": "Shaders/DepthPass_Quads.tesc.spv", "tessellationEvaluation": "Shaders/DepthPass_Quads.tese.spv" }, "depthPass": { "vertex": "Shaders/DepthPass_Tess.vert.spv", "tessellationControl": "DepthPass_Quads.tesc.spv", "tessellationEvaluation": "DepthPass_Quads.tese.spv" } } } } } A shader family file can indicate a root to inherit values from. The Blinn-Phong shader family pulls settings from the PBR file and just switches some of the fragment shader values.
      { "turboShaderFamily" : { "root": "PBR.json", "OPAQUE": { "default": { "base": { "fragment": "Shaders/Blinn-Phong.frag.spv" } }, "isolines": { "base": { "fragment": "Shaders/Blinn-Phong_Tess.frag.spv" } }, "triangles": { "base": { "fragment": "Shaders/Blinn-Phong_Tess.frag.spv" } }, "quads": { "base": { "fragment": "Shaders/Blinn-Phong_Tess.frag.spv" } } } } } If you want to implement a custom shader, this is more work because you have to define all your changes for each possible shader variation. But once that is done, you have a new shader that will work with all of these different settings, which in the end is easier. I considered making a more complex inheritance / cascading schema but I think eliminating ambiguity is the most important goal in this and that should override any concern about the verbosity of these files. After all, I only plan on providing a couple of these files and you aren't going to need any more unless you are doing a lot of custom shaders. And if you are, this is the best solution for you anyways.
      Consequently, the baseShader, depthShader, etc. values in the material file definition are going away. Leadwerks .mat files will always use the Blinn-Phong shader family, and there is no way to change this without creating a material file in the new JSON material format.
      The shader class is no longer derived from the Asset class because it doesn't correspond to a single file. Instead, it is just a dumb container. A ShaderModule class derived from the Asset class has been added, and this does correspond with a single .spv file. But you, the user, won't really need to deal with any of this.
      The result of this is that one material will work with tessellation enabled or disabled, quad, triangle, or line meshes, and animated meshes. I also added an optional parameter in the CreatePlane(), CreateBox(), and CreateQuadSphere() commands that will create these primitives out of quads instead of triangles. The main reason for supporting quad meshes is that the tessellation is cleaner when quads are used. (Note that Vulkan still displays quads in wireframe mode as if they are triangles. I think the renderer probably converts them to normal triangles after the tessellation stage.)


      I also was able to implement PN Quads, which is a quad version of the Bezier curve that PN Triangles add to tessellation.



      Basically all the complexity is being packed into the shader family file so that these decisions only have to be made once instead of thousands of times for each different material.
    • By Josh in Josh's Dev Blog 0
      I'm back from I/ITSEC. This conference is basically like the military's version of GDC. VR applications built with Leadwerks took up about half of Northrop Grumman's booth. There were many interesting discussions about new technology and I received a very warm reception. I feel very positive about our new technology going forward.

      I am currently reworking the text field widget script to work with our persistent 2D objects. This is long and boring but needs to be done. Not much else to say right now.
    • By Josh in Josh's Dev Blog 4
      Here are some screenshots showing more complex interface items scaled at different resolutions. First, here is the interface at 100% scaling:

      And here is the same interface at the same screen resolution, with the DPI scaling turned up to 150%:

      The code to control this is sort of complex, and I don't care. GUI resolution independence is a complicated thing, so the goal should be to create a system that does what it is supposed to do reliably, not to make complicated things simpler at the expense of functionality.
      function widget:Draw(x,y,width,height) local scale = self.gui:GetScale() self.primitives[1].size = iVec2(self.size.x, self.size.y - self.tabsize.y * scale) self.primitives[2].size = iVec2(self.size.x, self.size.y - self.tabsize.y * scale) --Tabs local n local tabpos = 0 for n = 1, #self.items do local tw = self:TabWidth(n) * scale if n * 3 > #self.primitives - 2 then self:AddRect(iVec2(tabpos,0), iVec2(tw, self.tabsize.y * scale), self.bordercolor, false, self.itemcornerradius * scale) self:AddRect(iVec2(tabpos+1,1), iVec2(tw, self.tabsize.y * scale) - iVec2(2 * scale,-1 * scale), self.backgroundcolor, false, self.itemcornerradius * scale) self:AddTextRect(self.items[n].text, iVec2(tabpos,0), iVec2(tw, self.tabsize.y*scale), self.textcolor, TEXT_CENTER + TEXT_MIDDLE) end if self:SelectedItem() == n then self.primitives[2 + (n - 1) * 3 + 1].position = iVec2(tabpos, 0) self.primitives[2 + (n - 1) * 3 + 1].size = iVec2(tw, self.tabsize.y * scale) + iVec2(0,2) self.primitives[2 + (n - 1) * 3 + 2].position = iVec2(tabpos + 1, 1) self.primitives[2 + (n - 1) * 3 + 2].color = self.selectedtabcolor self.primitives[2 + (n - 1) * 3 + 2].size = iVec2(tw, self.tabsize.y * scale) - iVec2(2,-1) self.primitives[2 + (n - 1) * 3 + 3].color = self.hoveredtextcolor self.primitives[2 + (n - 1) * 3 + 1].position = iVec2(tabpos,0) self.primitives[2 + (n - 1) * 3 + 2].position = iVec2(tabpos + 1, 1) self.primitives[2 + (n - 1) * 3 + 3].position = iVec2(tabpos,0) else self.primitives[2 + (n - 1) * 3 + 1].size = iVec2(tw, self.tabsize.y * scale) self.primitives[2 + (n - 1) * 3 + 2].color = self.tabcolor self.primitives[2 + (n - 1) * 3 + 2].size = iVec2(tw, self.tabsize.y * scale) - iVec2(2,2) if n == self.hovereditem then self.primitives[2 + (n - 1) * 3 + 3].color = self.hoveredtextcolor else self.primitives[2 + (n - 1) * 3 + 3].color = self.textcolor end self.primitives[2 + (n - 1) * 3 + 1].position = iVec2(tabpos,2) self.primitives[2 + (n - 1) * 3 + 2].position = iVec2(tabpos + 1, 3) self.primitives[2 + (n - 1) * 3 + 3].position = iVec2(tabpos,2) end self.primitives[2 + (n - 1) * 3 + 3].text = self.items[n].text tabpos = tabpos + tw - 2 end end  
×
×
  • Create New...